Before objects can be manipulated, they must be selected. This section covers the myriad of ways selection can be done.
Normally, the Select Tool is used for selecting objects. To activate, click on the icon in the Tool Box or use the keyboard shortcut (F1). One can toggle between another tool (except the Text Tool when in text enter mode) and the Select Tool by using the Space Bar if that other tool was selected first.
Rapid double-clicking on an object when the Select Tool is active will select an object and change the tool to a tool appropriate for editing that object. For example, double-clicking on a rectangle will select the rectangle and change the tool to the Rectangle Tool.
Multiple objects can be selected at the same time. The Notification Region lists the number and type of objects selected. This is especially useful when objects overlap and it isn't clear which are selected. By default, a box is drawn around each selected object. This can be changed to a small diamond Selection Cue under the Tools-Selector tab of the Inkscape Preferences dialog ( → (Shift+Ctrl+P)).
The Find dialog ( → (Ctrl+F)) discussed at the end of this section, is another way of selecting objects.
If an object cannot be selected, it may be locked. Objects can be locked against modification in the Object Properties dialog ( → (Shift+Ctrl+O)). Unlocking individual objects requires use of the XML Editor (look for the locked object and then either delete the “sodipidi:insensitive” attribute or uncheck the Lock box in the Object Properties dialog; see Chapter 18, XML Editor). One can unlock all objects with the command → . Objects may also be in a locked Layer (see the section called “Layers”).
It is possible to “hide” an object by checking the Hide box in the Object Properties dialog. This raises the question: How do you select a hidden object? There are several ways. One is to use the Find dialog ( → (Ctrl+F)); search for the Style display:none with the Include hidden box checked. A second way is to look for it with the XML Editor (see Chapter 18, XML Editor). A third way is to enable the selection of hidden objects using the Tab key in the Inkscape Preferences dialog's Selecting tab. A fourth way is to unhide all hidden objects using the → command. While these are solutions, the ultimate solution is just to not hide objects. Instead put them on a separate Layer and hide the Layer (see the section called “Layers”).
Left Mouse Click: Select Object: Select an object by clicking on it.
Shift+Left Mouse Click: Toggle Selection: Add or subtract an object to or from a selection. This allows multiple objects to be selected. If the object clicked on is not already selected, it will be. If it is already selected, it will be deselected.
Alt+Left Mouse Click: Select Under: Select next object below the currently selected object under the pointer. This allows one to select objects covered by others. Repeat to move downward in z-order. If the bottommost object is already selected, this will select the topmost object.
Left Mouse Drag: Select Multiple Objects: When started from empty space, this will select all objects that are completely within the rectangle that is formed by the start and stop points of the drag. This is often referred to as rubber-band selecting. The rubber band is the temporary line drawn while dragging.
Shift+Left Mouse Drag: Add Objects to Collection: Add objects within the rubber band to a preexisting selection. Also inhibits selection of an object under the start of the drag (without the shift, an object under the start of a drag is selected and moved). Selected objects within the rubber band are not deselected.
Alt+Left Mouse Drag: Touch Select Multiple Objects: This will select all objects that the mouse cursor touches while being dragged. A red line will indicate the path the cursor took. This is very useful when needing to select multiple paths as found in engravings or hair. Holding the Shift down will prevent dragging an already selected object if the drag begins over that object.
Shift+Alt+Left Mouse Drag: Touch-Add Multiple Objects to Collection: This will add all objects touched to a selection. It can also be used when the drag begins over an already selected object.
Most selecting of objects is done with the mouse. However, there are a few handy keyboard shortcuts.
Shift+Tab: Select previous object in z-order, that is the next object below the previous selected object. If no object is selected, it will select the highest object, which is normally the last object created. Works for objects in current Layer.
Ctrl+A: Select All: Selects all objects in current Layer.
Ctrl+Alt+A: Select All in All Layers: Selects all objects in all visible and unlocked Layers.
!: Invert Selection: Invert selection in current Layer. That is, all selected objects are deselected and all unselected objects are selected.
Alt+!: Invert selection in all visible and unlocked Layers. That is, all selected objects are deselected and all unselected objects are selected.
Select All, Select All in All Layers, Invert Selection, and Deselect are also available under the Edit menu.
The Find dialog ( → (Ctrl+F)) is another way to select objects with common features. A search is made through the SVG file and the found objects are selected on the Inkscape canvas.
The Find dialog has two parts. The top part defines what is searched for, while the bottom part defines where to search.
You can specify a Text string (in a text object), ID name (e.g., “rect1314”), Style feature (e.g., “fill-opacity”), or an Attribute type (e.g., “width”) for the search. The matches can be full or partial (i.e., “rect” would match “rect1314” and “rect1316”).
With the check boxes, you can specify where to search. If the All types box is checked, the search will take place in all objects (shapes, paths, text strings, etc.). If the box is not checked, a list of object types is presented that can be individually included or excluded from the search.
The Search in selection box determines if the search is limited to the currently selected objects. The Search in current layer box determines if the search is limited to the currently selected layer. The Include hidden box determines if hidden objects are included in the search, while the Include locked box determines if locked objects are included in the search.
At the very bottom of the dialog are two buttons: the first, Clear, to clear the search entry boxes and the second, Find, to perform the actual search. All objects that are found to match the search criteria are selected.
 Why would you want to hide and object? One example would be to save a text object before converting it into a path in case you ever wanted to edit the text again.
|© 2005-2015 Tavmjong Bah.||Get the Book or EBook.|